ISDN_DRV_HISAX

HiSax SiemensChipSet driver support

This is a driver supporting the Siemens chipset on various
ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
compatibles).

HiSax is just the name of this driver, not the name of any hardware.

If you have a card with such a chipset, you should say Y here and
also to the configuration option of the driver for your particular
card, below.

D-channel protocol features

HISAX_EURO

HiSax Support for EURO/DSS1

Say Y or N according to the D-channel protocol which your local
telephone service company provides.

The call control protocol E-DSS1 is used in most European countries.
If unsure, say Y.

DE_AOC

Support for german chargeinfo

If you want that the HiSax hardware driver sends messages to the
upper level of the isdn code on each AOCD (Advice Of Charge, During
the call -- transmission of the fee information during a call) and
on each AOCE (Advice Of Charge, at the End of the call --
transmission of fee information at the end of the call), say Y here.
This works only in Germany.

HISAX_NO_SENDCOMPLETE

Disable sending complete

If you have trouble with some ugly exchanges or you live in
Australia select this option.

HISAX_NO_LLC

Disable sending low layer compatibility

If you have trouble with some ugly exchanges try to select this
option.

HISAX_NO_KEYPAD

Disable keypad protocol option

If you like to send special dial strings including * or # without
using the keypad protocol, select this option.

HISAX_1TR6

HiSax Support for german 1TR6

Say Y or N according to the D-channel protocol which your local
telephone service company provides.

1TR6 is an old call control protocol which was used in Germany
before E-DSS1 was established. Nowadays, all new lines in Germany
use E-DSS1.

HISAX_NI1

HiSax Support for US NI1

Enable this if you like to use ISDN in US on a NI1 basic rate
interface.

HISAX_MAX_CARDS

Maximum number of cards supported by HiSax

This option allows you to specify the maximum number of cards which
the HiSax driver will be able to handle.

HiSax supported cards

HISAX_16_0

Teles 16.0/8.0

This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
and many compatibles.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port/shmem settings.

HISAX_16_3

Teles 16.3 or PNP or PCMCIA

This enables HiSax support for the Teles ISDN-cards S0-16.3 the
Teles/Creatix PnP and the Teles PCMCIA.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_TELESPCI

Teles PCI

This enables HiSax support for the Teles PCI.
See <file:Documentation/isdn/README.HiSax> on how to configure it.

HISAX_S0BOX

Teles S0Box

This enables HiSax support for the Teles/Creatix parallel port
S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
configure it.

HISAX_AVM_A1

AVM A1 (Fritz)

This enables HiSax support for the AVM A1 (aka "Fritz").

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_FRITZPCI

AVM PnP/PCI (Fritz!PnP/PCI)

This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
See <file:Documentation/isdn/README.HiSax> on how to configure it.

HISAX_AVM_A1_PCMCIA

AVM A1 PCMCIA (Fritz)

This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
See <file:Documentation/isdn/README.HiSax> on how to configure it.

HISAX_ELSA

Elsa cards

This enables HiSax support for the Elsa Mircolink ISA cards, for the
Elsa Quickstep series cards and Elsa PCMCIA.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_IX1MICROR2

ITK ix1-micro Revision 2

This enables HiSax support for the ITK ix1-micro Revision 2 card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_DIEHLDIVA

Eicon.Diehl Diva cards

This enables HiSax support for the Eicon.Diehl Diva none PRO
versions passive ISDN cards.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_ASUSCOM

ASUSCOM ISA cards

This enables HiSax support for the AsusCom and their OEM versions
passive ISDN ISA cards.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_TELEINT

TELEINT cards

This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_HFCS

HFC-S based cards

This enables HiSax support for the HFC-S 2BDS0 based cards, like
teles 16.3c.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_SEDLBAUER

Sedlbauer cards

This enables HiSax support for the Sedlbauer passive ISDN cards.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using the different cards, a different D-channel protocol, or
non-standard IRQ/port settings.

HISAX_SPORTSTER

USR Sportster internal TA

This enables HiSax support for the USR Sportster internal TA card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_MIC

MIC card

This enables HiSax support for the ITH MIC card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_NETJET

NETjet card

This enables HiSax support for the NetJet from Traverse
Technologies.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_NETJET_U

NETspider U card

This enables HiSax support for the Netspider U interface ISDN card
from Traverse Technologies.
See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_NICCY

Niccy PnP/PCI card

This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_ISURF

Siemens I-Surf card

This enables HiSax support for the Siemens I-Talk/I-Surf card with
ISAR chip.
See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_HSTSAPHIR

HST Saphir card

This enables HiSax support for the HST Saphir card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_BKM_A4T

Telekom A4T card

This enables HiSax support for the Telekom A4T card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_SCT_QUADRO

Scitel Quadro card

This enables HiSax support for the Scitel Quadro card.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_GAZEL

Gazel cards

This enables HiSax support for the Gazel cards.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_HFC_PCI

HFC PCI-Bus cards

This enables HiSax support for the HFC-S PCI 2BDS0 based cards.

For more information see under
<file:Documentation/isdn/README.hfc-pci>.

HISAX_W6692

Winbond W6692 based cards

This enables HiSax support for Winbond W6692 based PCI ISDN cards.

See <file:Documentation/isdn/README.HiSax> on how to configure it
using a different D-channel protocol, or non-standard IRQ/port
settings.

HISAX_HFC_SX

HFC-S+, HFC-SP, HFC-PCMCIA cards

This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
cards. This code is not finished yet.

HISAX_ENTERNOW_PCI

Formula-n enter:now PCI card

This enables HiSax support for the Formula-n enter:now PCI
ISDN card.

HISAX_DEBUG

HiSax debugging

This enables debugging code in the new-style HiSax drivers, i.e.
the ST5481 USB driver currently.
If in doubt, say yes.

HiSax PCMCIA card service modules

HISAX_SEDLBAUER_CS

Sedlbauer PCMCIA cards

This enables the PCMCIA client driver for the Sedlbauer Speed Star
and Speed Star II cards.

HISAX_ELSA_CS

ELSA PCMCIA MicroLink cards

This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
card.

HISAX_AVM_A1_CS

AVM A1 PCMCIA cards

This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
PCMCIA cards.

HISAX_TELES_CS

TELES PCMCIA cards

This enables the PCMCIA client driver for the Teles PCMCIA cards.

HiSax sub driver modules

HISAX_ST5481

ST5481 USB ISDN modem (EXPERIMENTAL)

This enables the driver for ST5481 based USB ISDN adapters,
e.g. the BeWan Gazel 128 USB

HISAX_HFCUSB

HFC USB based ISDN modems (EXPERIMENTAL)

This enables the driver for HFC USB based ISDN modems.

HISAX_HFC4S8S

HFC-4S/8S based ISDN cards (EXPERIMENTAL)

This enables the driver for HFC-4S/8S based ISDN cards.

HISAX_FRITZ_PCIPNP

AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)

This enables the driver for the AVM Fritz!Card PCI,
Fritz!Card PCI v2 and Fritz!Card PnP.
(the latter also needs you to select "ISA Plug and Play support"
from the menu "Plug and Play configuration")