drivers/isdn/gigaset/Kconfig v3.0-rc7

This driver supports the Siemens Gigaset SX205/255 family of
ISDN DECT bases, including the predecessors Gigaset 3070/3075
and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
721X.
If you have one of these devices, say M here and for at least
one of the connection specific parts that follow.
This will build a module called "gigaset".
Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
as a module, you have to build this driver as a module too,
otherwise the Gigaset device won't show up as an ISDN device.

Build the Gigaset driver as a CAPI 2.0 driver interfacing with
the Kernel CAPI subsystem. To use it with the old ISDN4Linux
subsystem you'll have to enable the capidrv glue driver.
(select ISDN_CAPI_CAPIDRV.)
Say N to build the old native ISDN4Linux variant.
If unsure, say Y.

Say M here if you want to use the USB interface of the Gigaset
base for connection to your system.
This will build a module called "bas_gigaset".

Say M here if you want to connect to the Gigaset base via DECT
using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
This will build a module called "usb_gigaset".

Say M here if you want to connect to the Gigaset base via DECT
using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
This will build a module called "ser_gigaset".

This enables debugging code in the Gigaset drivers.
If in doubt, say yes.