Include support for the ARM(R) RealView(R) Emulation Baseboard
platform.

Enable support for the Cortex-A9MPCore tile fitted to the
Realview(R) Emulation Baseboard platform.

Enable support for the ARM11MPCore tile fitted to the Realview(R)
Emulation Baseboard platform.

Enable support for the ARM11MPCore Revision B tile on the
Realview(R) Emulation Baseboard platform. Since there are device
address differences, a kernel built with this option enabled is
not compatible with other revisions of the ARM11MPCore tile.

Include support for the ARM(R) RealView(R) Platform Baseboard for
the ARM11MPCore.  This platform has an on-board ARM11MPCore and has
support for PCI-E and Compact Flash.

Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.

Select this option if Linux will only run in secure mode on the
RealView PB1176 platform and access to the secure flash memory
block (64MB @ 0x3c000000) is required.

Include support for the ARM(R) RealView Platform Baseboard for
Cortex(tm)-A8.  This platform has an on-board Cortex-A8 and has
support for PCI-E and Compact Flash.

Include support for the ARM(R) RealView(R) Platform Baseboard
Explore.

RealView boards other than PB1176 have the RAM available at
0x70000000, 256MB of which being mirrored at 0x00000000. If
the board supports 512MB of RAM, this option allows the
memory to be accessed contiguously at the high physical
offset. On the PBX board, disabling this option allows 1GB of
RAM to be used with SPARSEMEM.