NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | CONFORMING TO | NOTES | SEE ALSO | COLOPHON
SEMCTL(2) Linux Programmer's Manual SEMCTL(2)
semctl - semaphore control operations
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/sem.h>
int semctl(int semid, int semnum, int cmd, ...);
semctl() performs the control operation specified by cmd on the semaphore set
identified by semid, or on the semnum-th semaphore of that set. (The
semaphores in a set are numbered starting at 0.)
This function has three or four arguments, depending on cmd. When there are
four, the fourth has the type union semun. The calling program must define
this union as follows:
union semun {
int val; /* Value for SETVAL */
struct semid_ds *buf; /* Buffer for IPC_STAT, IPC_SET */
unsigned short *array; /* Array for GETALL, SETALL */
struct seminfo *__buf; /* Buffer for IPC_INFO
(Linux-specific) */
};
The semid_ds data structure is defined in <sys/sem.h> as follows:
struct semid_ds {
struct ipc_perm sem_perm; /* Ownership and permissions */
time_t sem_otime; /* Last semop time */
time_t sem_ctime; /* Last change time */
unsigned short sem_nsems; /* No. of semaphores in set */
};
The ipc_perm structure is defined in <sys/ipc.h> as follows (the highlighted
fields are settable using IPC_SET):
struct ipc_perm {
key_t __key; /* Key supplied to semget(2) */
uid_t uid; /* Effective UID of owner */
gid_t gid; /* Effective GID of owner */
uid_t cuid; /* Effective UID of creator */
gid_t cgid; /* Effective GID of creator */
unsigned short mode; /* Permissions */
unsigned short __seq; /* Sequence number */
};
Valid values for cmd are:
IPC_STAT Copy information from the kernel data structure associated with
semid into the semid_ds structure pointed to by arg.buf. The
argument semnum is ignored. The calling process must have read
permission on the semaphore set.
IPC_SET Write the values of some members of the semid_ds structure pointed
to by arg.buf to the kernel data structure associated with this
semaphore set, updating also its sem_ctime member. The following
members of the structure are updated: sem_perm.uid, sem_perm.gid,
and (the least significant 9 bits of) sem_perm.mode. The effective
UID of the calling process must match the owner (sem_perm.uid) or
creator (sem_perm.cuid) of the semaphore set, or the caller must be
privileged. The argument semnum is ignored.
IPC_RMID Immediately remove the semaphore set, awakening all processes
blocked in semop(2) calls on the set (with an error return and errno
set to EIDRM). The effective user ID of the calling process must
match the creator or owner of the semaphore set, or the caller must
be privileged. The argument semnum is ignored.
IPC_INFO (Linux-specific)
Returns information about system-wide semaphore limits and
parameters in the structure pointed to by arg.__buf. This structure
is of type seminfo, defined in <sys/sem.h> if the _GNU_SOURCE
feature test macro is defined:
struct seminfo {
int semmap; /* Number of entries in semaphore
map; unused within kernel */
int semmni; /* Maximum number of semaphore sets */
int semmns; /* Maximum number of semaphores in all
semaphore sets */
int semmnu; /* System-wide maximum number of undo
structures; unused within kernel */
int semmsl; /* Maximum number of semaphores in a
set */
int semopm; /* Maximum number of operations for
semop(2) */
int semume; /* Maximum number of undo entries per
process; unused within kernel */
int semusz; /* Size of struct sem_undo */
int semvmx; /* Maximum semaphore value */
int semaem; /* Max. value that can be recorded for
semaphore adjustment (SEM_UNDO) */
};
The semmsl, semmns, semopm, and semmni settings can be changed via
/proc/sys/kernel/sem; see proc(5) for details.
SEM_INFO (Linux-specific)
Returns a seminfo structure containing the same information as for
IPC_INFO, except that the following fields are returned with
information about system resources consumed by semaphores: the
semusz field returns the number of semaphore sets that currently
exist on the system; and the semaem field returns the total number
of semaphores in all semaphore sets on the system.
SEM_STAT (Linux-specific)
Returns a semid_ds structure as for IPC_STAT. However, the semid
argument is not a semaphore identifier, but instead an index into
the kernel's internal array that maintains information about all
semaphore sets on the system.
GETALL Return semval (i.e., the current value) for all semaphores of the
set into arg.array. The argument semnum is ignored. The calling
process must have read permission on the semaphore set.
GETNCNT The system call returns the value of semncnt for the semnum-th
semaphore of the set (i.e., the number of processes waiting for an
increase of semval for the semnum-th semaphore of the set). The
calling process must have read permission on the semaphore set.
GETPID The system call returns the value of sempid for the semnum-th
semaphore of the set (i.e., the PID of the process that executed the
last semop(2) call for the semnum-th semaphore of the set). The
calling process must have read permission on the semaphore set.
GETVAL The system call returns the value of semval for the semnum-th
semaphore of the set. The calling process must have read permission
on the semaphore set.
GETZCNT The system call returns the value of semzcnt for the semnum-th
semaphore of the set (i.e., the number of processes waiting for
semval of the semnum-th semaphore of the set to become 0). The
calling process must have read permission on the semaphore set.
SETALL Set semval for all semaphores of the set using arg.array, updating
also the sem_ctime member of the semid_ds structure associated with
the set. Undo entries (see semop(2)) are cleared for altered
semaphores in all processes. If the changes to semaphore values
would permit blocked semop(2) calls in other processes to proceed,
then those processes are woken up. The argument semnum is ignored.
The calling process must have alter (write) permission on the
semaphore set.
SETVAL Set the value of semval to arg.val for the semnum-th semaphore of
the set, updating also the sem_ctime member of the semid_ds
structure associated with the set. Undo entries are cleared for
altered semaphores in all processes. If the changes to semaphore
values would permit blocked semop(2) calls in other processes to
proceed, then those processes are woken up. The calling process
must have alter permission on the semaphore set.
On failure semctl() returns -1 with errno indicating the error.
Otherwise the system call returns a non-negative value depending on cmd as
follows:
GETNCNT the value of semncnt.
GETPID the value of sempid.
GETVAL the value of semval.
GETZCNT the value of semzcnt.
IPC_INFO the index of the highest used entry in the kernel's internal array
recording information about all semaphore sets. (This information
can be used with repeated SEM_STAT operations to obtain
information about all semaphore sets on the system.)
SEM_INFO As for IPC_INFO.
SEM_STAT the identifier of the semaphore set whose index was given in
semid.
All other cmd values return 0 on success.
On failure, errno will be set to one of the following:
EACCES The argument cmd has one of the values GETALL, GETPID, GETVAL, GETNCNT,
GETZCNT, IPC_STAT, SEM_STAT, SETALL, or SETVAL and the calling process
does not have the required permissions on the semaphore set and does
not have the CAP_IPC_OWNER capability.
EFAULT The address pointed to by arg.buf or arg.array isn't accessible.
EIDRM The semaphore set was removed.
EINVAL Invalid value for cmd or semid. Or: for a SEM_STAT operation, the
index value specified in semid referred to an array slot that is
currently unused.
EPERM The argument cmd has the value IPC_SET or IPC_RMID but the effective
user ID of the calling process is not the creator (as found in
sem_perm.cuid) or the owner (as found in sem_perm.uid) of the semaphore
set, and the process does not have the CAP_SYS_ADMIN capability.
ERANGE The argument cmd has the value SETALL or SETVAL and the value to which
semval is to be set (for some semaphore of the set) is less than 0 or
greater than the implementation limit SEMVMX.
SVr4, POSIX.1-2001.
The IPC_INFO, SEM_STAT and SEM_INFO operations are used by the ipcs(8) program
to provide information on allocated resources. In the future these may
modified or moved to a /proc file system interface.
Various fields in a struct semid_ds were typed as short under Linux 2.2 and
have become long under Linux 2.4. To take advantage of this, a recompilation
under glibc-2.1.91 or later should suffice. (The kernel distinguishes old and
new calls by an IPC_64 flag in cmd.)
In some earlier versions of glibc, the semun union was defined in <sys/sem.h>,
but POSIX.1-2001 requires that the caller define this union. On versions of
glibc where this union is not defined, the macro _SEM_SEMUN_UNDEFINED is
defined in <sys/sem.h>.
The following system limit on semaphore sets affects a semctl() call:
SEMVMX Maximum value for semval: implementation dependent (32767).
For greater portability it is best to always call semctl() with four
arguments.
ipc(2), semget(2), semop(2), capabilities(7), sem_overview(7), svipc(7)
This page is part of release 3.23 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can be found
at http://www.kernel.org/doc/man-pages/.
Linux 2009-09-27 SEMCTL(2)