NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | CONFORMING TO | NOTES | SEE ALSO | COLOPHON
MSGOP(2) Linux Programmer's Manual MSGOP(2)
msgrcv, msgsnd - message operations
#include <sys/types.h>
#include <sys/ipc.h>
#include <sys/msg.h>
int msgsnd(int msqid, const void *msgp, size_t msgsz, int msgflg);
ssize_t msgrcv(int msqid, void *msgp, size_t msgsz, long msgtyp,
int msgflg);
The msgsnd() and msgrcv() system calls are used, respectively, to send
messages to, and receive messages from, a message queue. The calling process
must have write permission on the message queue in order to send a message,
and read permission to receive a message.
The msgp argument is a pointer to caller-defined structure of the following
general form:
struct msgbuf {
long mtype; /* message type, must be > 0 */
char mtext[1]; /* message data */
};
The mtext field is an array (or other structure) whose size is specified by
msgsz, a non-negative integer value. Messages of zero length (i.e., no mtext
field) are permitted. The mtype field must have a strictly positive integer
value. This value can be used by the receiving process for message selection
(see the description of msgrcv() below).
The msgsnd() system call appends a copy of the message pointed to by msgp to
the message queue whose identifier is specified by msqid.
If sufficient space is available in the queue, msgsnd() succeeds immediately.
(The queue capacity is defined by the msg_bytes field in the associated data
structure for the message queue. During queue creation this field is
initialized to MSGMNB bytes, but this limit can be modified using msgctl(2).)
If insufficient space is available in the queue, then the default behavior of
msgsnd() is to block until space becomes available. If IPC_NOWAIT is
specified in msgflg, then the call instead fails with the error EAGAIN.
A blocked msgsnd() call may also fail if:
* the queue is removed, in which case the system call fails with errno set to
EIDRM; or
* a signal is caught, in which case the system call fails with errno set to
EINTR;see signal(7). (msgsnd() is never automatically restarted after being
interrupted by a signal handler, regardless of the setting of the SA_RESTART
flag when establishing a signal handler.)
Upon successful completion the message queue data structure is updated as
follows:
msg_lspid is set to the process ID of the calling process.
msg_qnum is incremented by 1.
msg_stime is set to the current time.
The msgrcv() system call removes a message from the queue specified by msqid
and places it in the buffer pointed to by msgp.
The argument msgsz specifies the maximum size in bytes for the member mtext of
the structure pointed to by the msgp argument. If the message text has length
greater than msgsz, then the behavior depends on whether MSG_NOERROR is
specified in msgflg. If MSG_NOERROR is specified, then the message text will
be truncated (and the truncated part will be lost); if MSG_NOERROR is not
specified, then the message isn't removed from the queue and the system call
fails returning -1 with errno set to E2BIG.
The argument msgtyp specifies the type of message requested as follows:
* If msgtyp is 0, then the first message in the queue is read.
* If msgtyp is greater than 0, then the first message in the queue of type
msgtyp is read, unless MSG_EXCEPT was specified in msgflg, in which case the
first message in the queue of type not equal to msgtyp will be read.
* If msgtyp is less than 0, then the first message in the queue with the
lowest type less than or equal to the absolute value of msgtyp will be read.
The msgflg argument is a bit mask constructed by ORing together zero or more
of the following flags:
IPC_NOWAIT
Return immediately if no message of the requested type is in the queue.
The system call fails with errno set to ENOMSG.
MSG_EXCEPT
Used with msgtyp greater than 0 to read the first message in the queue
with message type that differs from msgtyp.
MSG_NOERROR
To truncate the message text if longer than msgsz bytes.
If no message of the requested type is available and IPC_NOWAIT isn't
specified in msgflg, the calling process is blocked until one of the following
conditions occurs:
* A message of the desired type is placed in the queue.
* The message queue is removed from the system. In this case the system call
fails with errno set to EIDRM.
* The calling process catches a signal. In this case the system call fails
with errno set to EINTR. (msgrcv() is never automatically restarted after
being interrupted by a signal handler, regardless of the setting of the
SA_RESTART flag when establishing a signal handler.)
Upon successful completion the message queue data structure is updated as
follows:
msg_lrpid is set to the process ID of the calling process.
msg_qnum is decremented by 1.
msg_rtime is set to the current time.
On failure both functions return -1 with errno indicating the error, otherwise
msgsnd() returns 0 and msgrcv() returns the number of bytes actually copied
into the mtext array.
When msgsnd() fails, errno will be set to one among the following values:
EACCES The calling process does not have write permission on the message
queue, and does not have the CAP_IPC_OWNER capability.
EAGAIN The message can't be sent due to the msg_qbytes limit for the queue and
IPC_NOWAIT was specified in msgflg.
EFAULT The address pointed to by msgp isn't accessible.
EIDRM The message queue was removed.
EINTR Sleeping on a full message queue condition, the process caught a
signal.
EINVAL Invalid msqid value, or non-positive mtype value, or invalid msgsz
value (less than 0 or greater than the system value MSGMAX).
ENOMEM The system does not have enough memory to make a copy of the message
pointed to by msgp.
When msgrcv() fails, errno will be set to one among the following values:
E2BIG The message text length is greater than msgsz and MSG_NOERROR isn't
specified in msgflg.
EACCES The calling process does not have read permission on the message queue,
and does not have the CAP_IPC_OWNER capability.
EAGAIN No message was available in the queue and IPC_NOWAIT was specified in
msgflg.
EFAULT The address pointed to by msgp isn't accessible.
EIDRM While the process was sleeping to receive a message, the message queue
was removed.
EINTR While the process was sleeping to receive a message, the process caught
a signal; see signal(7).
EINVAL msgqid was invalid, or msgsz was less than 0.
ENOMSG IPC_NOWAIT was specified in msgflg and no message of the requested type
existed on the message queue.
SVr4, POSIX.1-2001.
The msgp argument is declared as struct msgbuf * with libc4, libc5, glibc 2.0,
glibc 2.1. It is declared as void * with glibc 2.2 and later, as required by
SUSv2 and SUSv3.
The following limits on message queue resources affect the msgsnd() call:
MSGMAX Maximum size for a message text: 8192 bytes (on Linux, this limit can
be read and modified via /proc/sys/kernel/msgmax).
MSGMNB Default maximum size in bytes of a message queue: 16384 bytes (on
Linux, this limit can be read and modified via
/proc/sys/kernel/msgmnb). The superuser can increase the size of a
message queue beyond MSGMNB by a msgctl(2) system call.
The implementation has no intrinsic limits for the system wide maximum number
of message headers (MSGTQL) and for the system wide maximum size in bytes of
the message pool (MSGPOOL).
msgctl(2), msgget(2), capabilities(7), mq_overview(7), svipc(7)
This page is part of release 3.23 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can be found
at http://www.kernel.org/doc/man-pages/.
Linux 2008-04-23 MSGOP(2)